rotary hay rake/tedder

By adjusting the tines,the machine can be used as rake or tedder.

As a tedder,it can spread and flip the green-cut materials and withdraws,for drying evenly

Technical parameters

Model	RXHR2500
Raking width	2500mm
Tedding width	1600mm
Dimensions	2100*2500*950mm
Weight	160kgs
Tines No.s	12
Working speed	4-8km/h
Matched power	18-50hp
PTO RPM	540R/M

finger wheel hay rake

Finger wheel Hay Rake                                                  

1. easily adaptable to each type of tractor by its three point linkage system
2. used for separating the green materials over the field to ventilate them to dry in a short time.
3. used to collect the cut grass|stalk|straw together and put these in a standard line
4. better for large field and large baler



PARAMETER DATA                                                                                    

Model	RXHR-3	RXHR-4	RXHR-5
Weight  kgs	150	295	345
Working speed  km/h	5-10	5-10	5-10
Productivity ha/h	1	1.5~3.5	3~5
Matched power HP	15/20	20/27	40/55
Working width m	3	4	4.8
NO.of wheels	4	6	8
Disc diameter  m	1.46	1.46	1.46
No.of tines/  pcs	40	40	40
grass width m	1~1.5	1~1.5	1~1.5
Mounted type	three point mounted

Square Baler RXFK2060

RXFK2060

square baler is designed for picking up

 and packing hay, crop straw and stalk into square bales.

1. Offset design to compact tractors from 25-50HP.

2. Widely used in hay, wheat, rice, corn, soybean,alfalfa and etc.

3. Larger working width, lower lost.

4. Higher efficiency than round baler, since strapping and 

   ejecting bales while the tractors walking.

5. Bales length and density adjustable.

Model	RXFK2060	RXFK3060
Dimensions	4100x2150x1300mm	5000x2800x1400mm
Structural weight	1030kgs	1460kgs
Working width	1440mm	1800mm
Spring teeth No.s	32	44
Plunger stroke	600mm	700mm
Plunger frequency	92 times/min	90times/min
Working capability	80-240bales/hour	80-240 bales/hour
Cross section of bales	320x420mm	360x480mm
Length of bales	30-100mm adjustable	300-1200mm adjustable
Matching power	Above 25HP	Above 35hp
PTO RPM	540	540

mini round baler RXYK0850/0870

RXYK0850 mini round baler  cover taken off.

anther side of YXYK0850 without cover

mini hay baler

small hay baler

small roll hay baler

The hay baler can pick up hay,silage, wheat, rice straws and crumbled corn stalks and compress them into compact bales that are easy to handle, transport and store. 

A. Mini round baler pack the materials into Cylinder Shape

Features: 

1. suitable for compact tractors 18-50HP, only need the PTO.

2. Auto twine blinding system

3. Natural hemp twine, harmless to animal

4. Bale density adjustable

MODEL	RXYK0850	RXYK0870
Bale size     mm Diameter X Width	500 X 700	610x700
Dimensions   mm	1150x1300x1200	1300x1300x1350
Weight（Approx) kgs	390	440
Pickup width mm	800	800
Working speed km/h	2-5	2-5
Capacity  Bales/hour	80-120	80-100
Tire size	16X6.50-8	16x6.50-8
Horsepower Requirement	18-30hp	30-50hp
PTO RPM	540	540

wood chippers

wood chippers are used for cutting wood into smaller wood chips. 

The disc wood chippers employ steel disc with rectangular blades mounted upon it and fans upon the other side.

While the disc rotates , powered by PTO shaft or engines, the blades cut the wood into pieces and the fans blow the chips out from chute.  

 1.  PTO  type  WC-8

MODEL	WC-8
Dimensions	1600x1020x 1400mm
Structure Weight	370kgs
Blade Turning Radius	302mm
Chipper Max diameter	200mm
Chipper Efficiency	8~ 9  m 3 /h
PTO  RPM	540
Power Required	25hp~50hp

2. Diesel  wood  chipper  DWC 18 /22/ 40

Trailer Mounted Wood chipper , with self feeding system,3Blades, Electric Start diesel engine,360 degree discharge chute, 2”Ball Hitch&Safety Chains and leaf spring on the axle. .
Model		DWC-18/ DWC-22	DWC-40
Engine	model	Yanmar or Changchai  CY1115  diesel engine	Laidong 4L22B diesel engine
	type	Single cylinder, horizontal, four-stroke	Four cylinders, horizontal, four-stroke
	Rated power	16.2KW/2200rpm	25.7KW/2350rpm
	Fuel consumption rate	<245g/KW.h	<238g/KW.h
	Engine oil consumption	<1.5g/KW.h	<1.5g/KW.h
	Cooled style	Water-cooled (evaporation)	Water-cooled
	Start	Electric start	Electric start
Feeding system		Mechanical or hydraulic	hydraulic
Chipper capacity		150mm (Max. To 200mm)	200mm
Flywheel diameter		640mm	640mm
Flywheel weight		85kgs	85kgs
Blades Number		1 stationary  blade, 2 rotary blades	1 stationary  blade, 2 rotary blades
Feed Hopper inner Opening		200 x 220mm	200 x 220mm
Discharge Hood Height		2000mm	2000mm
Rated RPM		1080	1280
Weight		650kg	800kgs
Working efficiency		7-11 cbm/h	9-13cbm/h

Options: 1. hydraulic feeding, 2. oil tank, PTO pump,3. double feeding rollers   4. Round flywheel housing . 5. Longer chute.